Corporate Home | CONTACT US   
  HOME > SAMPLING EQUIPMENT  
   
Vacuum Pumps

The Vacuum Pump extracts samples from a dipstick, or non-pressurized system. The pump is attached to the sample jar; a tube is inserted into the pump, and then into the dipstick or reservoir about halfway. The pump handle should be activated until the sample jar is about ¾ full. Additional ¼" tubing is available in 54", 100 ft., and 1000 ft. rolls.

 TYPE
STOCK NO.
PRICE
QUANTITY
 Oil Analysis Vacuum Pumps
 Vacuum Pump - Fits 3 or 4 oz. Sample Jar
VPUMPO
$23.00
 Vacuum Pump - Fits 8 oz. ISO Clean Sample Jar
VPUMP8
$40.00
 Coolant Analysis Vacuum Pumps
 Vacuum Pump - Fits 3 or 4 oz. Sample Jar
VPUMPC
$23.00



Probe Style Valve

The Probe Style Valve

Installation
  • Install on pressurized ports on engines, transmissions, compressors & hydraulics upstream of filter and downstream of critical components
  • Range of thread, materials and seal options to fit directly into most systems. Fewer adapters are necessary
  • Compact unibody design for tight locations

Reliability
  • Rugged patented valve. Successfully impulse tested to 1,000,000 cycles at 7800psi at Milwaukee School of Engineering Fluid Power Institute
  • Valve safely limits hand sampling to approximately 750psi. 6000psi spike resistance on hydraulic lines
  • Metal cap gives full secondary backup sealing to 6000psi
  • Superior elastomeric valving resists air inclusion and pressure spikes better than ball seat valving


 TYPE
STOCK NO.
PRICE
QUANTITY
 Probe Style Valves
 Sampling Valve KST,1/4" NPTF (-4)
VC14
$19.10
 Sampling Valve KST,1/8" NPTF (-2)
VC18
$19.10
 Sampling Valve KST,7/16" ORB (-4)
VC716
$20.55
 Sampling Valve KST,9/16" ORB (-6)
VC916
$20.55
 Accessories
 1/4" Series Probe 90 Deg. Reusable, (.250D-.171D SER4)
VCP14
$7.65



Push Button Sampling Valve

The Push Button Sampling Valve

Installation
  • Install on pressurized ports on engines, compressors & hydraulics upstream of filter and downstream of critical components
  • Range of thread, materials and seal options to fit directly into most systems. Fewer adapters necessary
  • Full 360 degree spout rotation to avoid orientation problems. No need for backing off on NPT Pipe threads and compromising seal
  • Frame mounted remote access bulkhead with microhose for difficult to locations
  • Most compact pushbutton available for tight locations

Reliability
  • Rugged patented valve. Successfully impulse tested to 1,000,000 cycles at 7800psi at Milwaukee School of Engineering Fluid Power Institute
  • Valve safely limits hand sampling to approximately 750psi. 6000psi spike resistance on hydraulic lines
  • Metal cap gives secondary backup sealing (from vacuum to 750psi) and dust protection
  • Weathersleeve prevents dirt buildup behind button.
  • Brass button reduces heat transfer


 TYPE
STOCK NO.
PRICE
QUANTITY
 Push Button Valves
 Sampling Valve KP Pushbutton,1/4" NPTF (-4)
VB14
$27.05
 Sampling Valve KP Pushbutton,1/4" NPTF (-4)Blue Sleeve
VB14B
$28.40
 Sampling Valve KP Pushbutton,1/4" NPTF (-4)Green Sleeve
VB14G
$28.40
 Sampling Valve KP Pushbutton,1/4" NPTF (-4)Red Sleeve
VB14R
$28.40
 Sampling Valve KP Pushbutton,1/4" NPTF (-4)Yellow Sleeve
VB14Y
$28.40
 Sampling Valve KP Pushbutton,1/8" NPTF (-2)
VB18
$27.05
 Sampling Valve KP Pushbutton,1/8" NPTF (-2)Blue Sleeve
VB18B
$28.40
 Sampling Valve KP Pushbutton,1/8" NPTF (-2)Green Sleeve
VB18G
$28.40
 Sampling Valve KP Pushbutton,1/8" NPTF (-2)Red Sleeve
VB18R
$28.40
 Sampling Valve KP Pushbutton,1/8" NPTF (-2)Yellow Sleeve
VB18Y
$28.40
 Sampling Valve KP Pushbutton,7/16" ORB (-4)
VB716
$28.35
 Sampling Valve KP Pushbutton,7/16" ORB (-4)Blue Sleeve
VB716B
$29.68
 Sampling Valve KP Pushbutton,7/16" ORB (-4)Green Sleeve
VB716G
$29.68
 Sampling Valve KP Pushbutton,7/16" ORB (-4)Red Sleeve
VB716R
$29.68
 Sampling Valve KP Pushbutton,7/16" ORB (-4)Yellow Sleeve
VB716Y
$29.68
 Sampling Valve KP Pushbutton,9/16" ORB (-6)
VB916
$28.35
 Sampling Valve KP Pushbutton,9/16" ORB (-6)Blue Sleeve
VB916B
$29.68
 Sampling Valve KP Pushbutton,9/16" ORB (-6)Green Sleeve
VB916G
$29.68
 Sampling Valve KP Pushbutton,9/16" ORB (-6)Red Sleeve
VB916R
$29.68
 Sampling Valve KP Pushbutton,9/16" ORB (-6)Yellow Sleeve
VB916Y
$29.68
 Sampling Valve KP Pushbutton,M12x1.5,ISO 6149-3
VBM12
$36.55
 Sampling Valve KP Pushbutton,M14x1.5,ISO 6149-3
VBM14
$36.55
 Sampling Valve KP Pushbutton,M14x1.5,ISO 6149-3 Blue Sleeve
VBM14B
$37.90
 Sampling Valve KP Pushbutton,M14x1.5,ISO 6149-3 Green Sleeve
VBM14G
$37.90
 Sampling Valve KP Pushbutton,M14x1.5,ISO 6149-3 Red Sleeve
VBM14R
$37.90
 Sampling Valve KP Pushbutton,M14x1.5,ISO 6149-3 Yellow Sleeve
VBM14Y
$37.90



Pitot Tubes Sampling Valve

The Pitot Tube Sampling Valve

Installation
  • Install on low or unpressurized ports on gearboxes and sumps
  • Position tubing away from any moving parts
  • Tubing should be positioned close to the center of the gearbox to get the most accurate sample
  • Swivel option is recommended for very confined areas
  • 1/4" NPT threads are standard, for larger port sizes please use 3/8", 1/2" and 3/4" NPT bushings

Reliability
  • Rugged ball valve and steel body. Successfully impulse tested to 1,000,000 cycles at 7800psi at Milwaukee School of Engineering Fluid Power Institute
  • Rated up to 6000psi spike resistance.
  • SAE J527 tubing connection to valve. No brazing involved
  • Metal cap gives full secondary backup sealing to 6000psi and offers dust protection


 TYPE
STOCK NO.
PRICE
QUANTITY
 Pitot Tube Valves
 Sampling Valve LT,1/4" NPT,8" Tube
VLP14
$46.00
        All Pitot Tube Valves require the above item
 Sampling Valve LT,1/4" NPT,12" Tube
VHF12
$50.25
 Sampling Valve LT,1/4" NPT,18" Tube
VHF18
$51.00
 Sampling Valve LT,1/4" NPT,24" Tube
VHF24
$51.45
 Sampling Valve LT,1/4" NPT,12" Tube Swivel
VHF12W
$65.15
 Sampling Valve LT,1/4" NPT,18" Tube Swivel
VHF18W
$66.00
 Sampling Valve LT,1/4" NPT,24" Tube, Swivel
VHF24W
$66.75
 Sampling Valve LT,1/4" NPT,12" Stainless Steel Tube
VHF12S
$64.40
 Sampling Valve LT,1/4" NPT,18"Stainless Steel Tube
VHF18S
$68.40
 Sampling Valve LT,1/4" NPT,24" Stainless Steel Tube
VHF24S
$72.45
 Sampling Valve LT,1/4" NPT,12" Stainless Steel Tube Swivel
VHF12X
$79.75
 Sampling Valve LT,1/4" NPT,18" Stainless Steel Tube Swivel
VHF18X
$83.80
 Sampling Valve LT,1/4" NPT,24" Stainless Steel Tube, Swivel
VHF24X
$87.75



RedCap

The Red Cap Push Button Valve is used for sampling pressurized systems with 4 - 100 lbs psi. This valve is fast, safe, and does not require any tubing or other additional items to complete sampling.

 TYPE
STOCK NO.
PRICE
QUANTITY
 Brass 1/8" NPT
RC18
$41.00
 Brass 1/4" NPT
RC14
$41.00



If you have any questions about how to order from the online store or need assistance with an order, contact one of our Customer Service representatives at +1.317.808.3750 or email custserv@eoilreports.com.